Crown vs Raymond Reach Trucks: Which One Fits Your Warehouse?

If you run narrow aisle racking in North America, your reach truck decision usually comes down to two names. Crown and Raymond have split this category for decades, and both build a genuinely good machine. That is exactly why the choice is hard. Nobody is going to talk you out of either one on quality grounds.

I sell and service used lift trucks for a living, so I see both brands after the shine wears off. This comparison is written from that side of the fence: what actually separates them, what the spec sheets do and do not tell you, and what changes when you are buying secondhand instead of new.

What is the difference between a Crown and a Raymond reach truck?

How high and how heavy can each brand lift?

	Crown RM 6000	Crown RM 6000S	Raymond 7500	Raymond 7530
Configuration	Stand up, single reach	Sit down, single reach	Stand up, single reach	High capacity, single or deep
Rated capacity	4,500 lb	4,500 lb	3,500 to 4,500 lb	4,500 lb
Max lift height	400 in	505 in	Not published as lift height	505 in at 2,000 lb
Max elevated height	Not published separately	Not published separately	444 in	542 in
Head length	56 to 60.4 in	62.4 to 64.9 in	Varies by battery compartment	Varies by battery compartment
Power	36V, 930 to 1,240 Ah	36V, 930 to 1,395 Ah	36V	36V

Which reach truck needs a narrower aisle?

Which brand gets more pallets per battery charge?

Which reach truck is cheaper to maintain?

Do operators need retraining if you switch from Raymond to Crown?

Should you buy a used Crown or a used Raymond?

Which one should you buy?

Frequently asked questions

Are Crown and Raymond reach truck parts interchangeable?

Is Raymond owned by Toyota?

What is a deep reach truck and do I need one?

How many hours does a used reach truck have left in it?

The bottom line